| |
Remember this is “The biggest break through since radar
detectors” Popular Mechanics Magazine. Everyone will be throwing out their
outdated radar detectors to replace them with our advanced new products.
Remember now…no one and I mean NO ONE likes to get a ticket.
How it works
Over the past several years we have been mapping out the locations of all
red light, speed camera and speed traps in USA and Canada. Using 24 GPS
satellites that are overhead our NavAlert system tracks all traffic
enforcement locations and devices to give you audible warning upon approach.
(see below) We've got the database and the products that are on the cutting
edge of this lucrative new market!

Click here to watch how it works:
VIDEO
Our NavAlert Red Light Speed Camera and Speed Trap Driver
Warning System:
Click here to watch how it works: VIDEO
1. Simple Lighter Plug Installation
2. Alerts To Every type of Red Light Speed Camera in USA and Canada
3. Uses SIRF GPS technology
4. GPS data via USB can supply your laptop or cell phone GPS NMEA data
The NavAlert speed camera detector can store around 150,000
positions in its database. All cameras in North America covered. The speed
camera locations can be divided into different data sets, to distinguish
between such positions as fixed speed cameras, possible mobile camera
positions, red light cameras, schools, and high collision areas.
The tiny NavAlert unit has an LED display on the front of the unit, which
provides additional information to the voice announcements. While driving
normally it will display the current speed. When a warning is triggered, a
chime is heard followed by an announcement such as "camera ahead limit 60" ,
the speed limit at the camera site will flash , before going back to
displaying the vehicles speed. This will typically happen at 500 meters from
the camera position, . A second chime is heard at 200 yards from the camera
site, and if the vehicle is still over the speed limit, a continuous warning
is heard "reduce speed" + warning sound until the vehicle speed drops to the
speed limit, or the camera site is passed at which time a all clear chime is
heard.
Features
Detects Gatso, Truvelo, SPECS, Speedmaster, DS2, traffic light cameras, high
traffic collision areas and all other permanent safety cameras, The detector
will give an over-speed warning in close proximity to the camera if
exceeding the speed limit, but will automatically mute when within the speed
limit, The driver is advised of only cameras on the road they are driving
along, thereby negating false alerts, The driver is advised as they approach
high collision areas, GPS speedometer, Announces close proximity to schools
Monday - Friday 08:00 - 5:00, (school zones can be switched off) Displays
the current location as Latitude and Longitude, which can be relayed to the
emergency services or breakdown authorities.

Installation
The NavAlert is easy to install. In the box there is a small rubberized
magnet, with a peel off sticky base. The user simply has to remove the
sticker cover, and position the magnet on the top of their dashboard. Insert
the power jack into the cigar lighter, and plug the other end of the lead
into the NavAlert unit, then place on top of the magnet. It is now ready to
use.
The NavAlert is very easy to update via our website. The user simply logs
onto the website, and plugs the unit into the PC via the USB cable
(supplied). The user clicks the update database button on the front page of
the website, and follows a few simple instructions.
|
|