Get
Rid of the Rust!
Stop rust in its tracks
with Eastwood's
Rust Encapsulator. Rust Encapsulator chemically reacts with rust
to form a hard, durable coating - halting the further spread of rust!
Follow these simple steps to halt further corrosion and spread of rust
with Rust Encapsulator:
- Remove any loose
rust with a wire brush.
- Be sure your surface
is grease and oil free (Eastwood's PRE
Painting Prep works great!)
- Paint or spray
Rust
Encapsulator to the prepped area. Rust Encapsulator can be thinned
20% with laquer thinner to spray, and also comes in convenient aerosol
cans.
- Allow to dry for
6-8 hours. (You can apply 2 coats - wait 2-3 hours between coats.)
- Topcoat is not
required, but can be applied after 6-8 hours, if desired.
Paint-on Rust Encapsulator
comes in pint, quart, and gallon sizes. One quart will double-coat up
to 50 feet, while the gallon covers a whopping 200 feet with a double-coat.
Aerosol
cans are also available for hard-to-reach areas. Available in red,
black,
and silver,
Rust Encapsulator looks great even without a topcoat. Eastwood's Rust
Encapsulator is the best on the market - proven
to be superior in sunlight resistance, preventing rust creep,
and overall durability.
Get
Eastwood's
Rust Encapsulator and get rid of the rust!
|
